Mitsubishi Galant Block Heater Guide
2003–2010
Engine-specific fitment for the Mitsubishi Galant is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
Factory availability
Dealer-installed accessory in Canada on most years and trims
Cord location
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
Mitsubishi Galantengines & block heater part numbers
Engine list built from Natural Resources Canada model-year data; part numbers cross-referenced against the Zerostart / Phillips & Temro and Kat's application guides. Always confirm displacement and model year before ordering.
| Engine | Years | Zerostart kit | Cord | Kat's heater | Install location |
|---|---|---|---|---|---|
| 2.4L 4-cyl | 2003–2010 | 3100020(35 MM bore) | 3600006 | 11812+ cord 28812 | 2ND LF(4 o'clock position) |
| 3L 6-cyl | 2003–2003 | 3100055(1-5/8" bore) | 3600006 | 11603+ cord 28400 | LR(9 o'clock position) |
| 3.8L 6-cyl | 2004–2009 | 3100055(1-5/8" bore) | 3600006 | — | LR(12o'clock position) |
Zerostart part numbers: 31/35-prefix = heater kit, 36-prefix = detachable cordset. Kat's: 11xxx = heater element, 28xxx = cordset, 24xxx = pad heater. Install location codes are from the manufacturer's guide (LF = left front of block, RR = right rear, etc.); "position" is the element's clock orientation during install.
First: check whether you already have one
In Canada, block heaters are frequently installed at the port, the dealer, or by a previous owner — and then forgotten. Look for a two- or three-prong plug on a black cord near the grille, bumper, or tow hooks, sometimes still zip-tied from the factory. If you find one, test it before winter with our 5-minute multimeter test.
If you need one installed
A frost plug (cartridge) block heater for the Mitsubishi Galant typically runs $40–$120 CAD for the part, plus shop installation. See installation costs in your city — and book in October, before the first cold snap fills every shop calendar in the Prairies.
FAQ
Does the Mitsubishi Galant come with a block heater?
Dealer-installed accessory in Canada on most years and trims. Check behind the grille for a coiled cord before buying anything — many Canadian-market vehicles have a heater installed that the owner never knew about.
What block heater fits a Mitsubishi Galant?
The recommended setup is a frost plug (cartridge) block heater (typically 400 W). Engine-specific fitment for the Mitsubishi Galant is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
What is the block heater part number for a Mitsubishi Galant?
2.4L 4-cyl: Zerostart kit 3100020 with cord 3600006 (Kat's 11812); 3L 6-cyl: Zerostart kit 3100055 with cord 3600006 (Kat's 11603); 3.8L 6-cyl: Zerostart kit 3100055 with cord 3600006. Confirm displacement and model year against the fitment table before ordering.
Where is the block heater cord on a Mitsubishi Galant?
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
More Mitsubishi models
Similar vehicles