Subaru Crosstrek Block Heater Guide
2013–2026
Find the part for your engine
Check the engine size on your vehicle documents or under-hood label. Choose it explicitly even when only one option appears.
Already have a factory heater? A missing power cord may be all you need. Match the connector before ordering.
View the full engine and installation tableCatalog candidates for the Subaru Crosstrek are grouped by engine below. Check the source review for the exact application before choosing a heater or cord; shared engine size alone does not confirm fitment.
Factory availability
Dealer-installed accessory in Canada on most years and trims
Cord location
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
Subaru Crosstrek engines & block heater part numbers
Engine list built from Natural Resources Canada model-year data. Part numbers are catalog candidates unless a source review is shown for that application. Confirm the exact engine code, model year and installation port before ordering; an Amazon listing match does not confirm vehicle fitment.
| Engine | Years | Zerostart kit | Cord | Kat's heater | Install location |
|---|---|---|---|---|---|
| 2L 4-cyl | 2013–2025 | — | — | 11496Catalog candidate — confirm exact engine code and model year.400 W+ cord 28216 | — |
| 2.5L 4-cyl | 2021–2026 | No aftermarket listing — use the genuine Subaru dealer kit | |||
Reading the numbers: Zerostart 31/35- is the heater kit, 36- the detachable cordset ("lit" glows when the outlet is live). Kat's 11xxx is an element, 28xxx a cordset, 24xxx a pad. Location codes are the manufacturer's (LF = left front of block).
Find the heater or replacement cord
Match the exact part, engine and connector before buying. Search links are discovery links, not confirmed fits.
Part reference
Kat's 11496
Catalog starting point: confirm exact engine code, year and installation with the manufacturer.
No exact purchase listing verified yet. These links search Amazon; confirm the part before buying.
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
What it costs to plug in a Subaru Crosstrek — and what it saves
The catalogued element for the Crosstrek draws 400 W. Natural Resources Canada recommends a timer that runs the heater two hours before you drive rather than all night — that is what the numbers below assume.
| Province | ¢/kWh | Cost per 2 h plug-in | Full winter (120 nights) | Net per day |
|---|---|---|---|---|
| Quebec | 7.0 | $0.06 | $6.72 | +$0.22 |
| Manitoba | 10.2 | $0.08 | $9.79 | +$0.19 |
| Ontario (avg TOU) | 12.8 | $0.10 | $12.29 | +$0.17 |
| Alberta | 14.0 | $0.11 | $13.44 | +$0.16 |
| Saskatchewan | 15.5 | $0.12 | $14.88 | +$0.15 |
| Nova Scotia | 17.9 | $0.14 | $17.18 | +$0.13 |
Natural Resources Canada rates the Subaru Crosstrek at 8.9 L/100 km in city driving (median across 2017–2026 model years). On a 20 km winter commute that is about 1.8 L a day. NRCan measured that at −20 °C a block heater improves overall fuel economy by as much as 10% — roughly 0.18 L, or $0.28 of gasoline at $1.55/L. On a single short trip at −25 °C the saving can reach 25%. In most provinces the electricity costs less than the fuel it saves; in the priciest it roughly breaks even, and you still get the wear, defrost and cabin-heat benefits.
Fuel figures: Natural Resources Canada Fuel Consumption Ratings and Block Heaters Save Fuel and Help the Environment. Electricity rates are approximate 2026 residential averages — run your own numbers in the cost calculator.
Canadian buyer checklist
Three checks before spending money
1. Check for a cord
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
2. Match the engine
Confirm displacement, fuel and model year against the table. OEM accessory numbers can vary by VIN and market.
3. Check recalls
Search the VIN in the Transport Canada database before using an unfamiliar factory heater or cord.
No exact-fit listing? Use the three-question heater selector for a safe fallback.
Where to look for the Subaru Crosstrek block heater cord
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything. Use a flashlight from above and through the lower grille, then check behind the bumper cover without pulling on an unidentified wire. A factory cord may be capped and clipped or zip-tied out of sight.
Found damage? Use the cord identifier before choosing between a plug-end repair and a complete cordset.
No tools? The stick-on option
If you'd rather skip the install entirely, a magnetic heater grips any flat steel surface — oil pan, block, transmission pan — and moves between vehicles. Check that the Crosstrek's oil pan is steel first: a magnet won't hold on aluminum or composite pans.
Amazon buying options
Zerostart 3400017 magnetic heater, 200 W
A magnetic surface heater from Zerostart. Grips any flat steel surface — oil pan, transmission pan, small-engine sump. CSA certified.
Match the surface material, size and manufacturer limits. This is not vehicle-specific fitment.
Choose your Amazon store
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Part reference
Digital multimeter with resistance and continuity
The definitive block-heater test tool. Any meter with an ohms range and audible continuity can isolate a dead cord from a failed element.
Confirm the exact specification and application in the listing before ordering.
No exact purchase listing verified yet. These links search Amazon; confirm the part before buying.
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
First: check whether you already have one
Canadian-market vehicles are often fitted at the port or dealer and then forgotten by the next owner, so check the cord location above before you buy anything. If a cord is there, test it — a dead element and a dead cord look identical from the outside.
If you need one installed
Budget $40–$120 CAD for the part plus about an hour of labour, and book in October — Prairie shop calendars fill after the first cold snap.
FAQ
Does the Subaru Crosstrek come with a block heater?
Dealer-installed accessory in Canada on most years and trims. Check behind the grille for a coiled cord before buying anything — many Canadian-market vehicles have a heater installed that the owner never knew about.
What block heater fits a Subaru Crosstrek?
The recommended setup is a frost plug (cartridge) block heater (typically 400 W). Catalog candidates for the Subaru Crosstrek are grouped by engine below. Check the source review for the exact application before choosing a heater or cord; shared engine size alone does not confirm fitment.
What is the block heater part number for a Subaru Crosstrek?
2L 4-cyl: Kat's heater 11496 with cord 28216. Confirm displacement and model year against the fitment table before ordering.
Where is the block heater cord on a Subaru Crosstrek?
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
How much does it cost to plug in a Subaru Crosstrek?
At 400 W on a two-hour timer the heater uses about 0.80 kWh a night — roughly 10¢ in Ontario, 11¢ in Alberta and 6¢ in Quebec. Over a 120-night winter that is about $13.44 at Alberta rates.
Does a block heater save fuel on a Subaru Crosstrek?
Yes. Natural Resources Canada rates the Crosstrek at 8.9 L/100 km in city driving, and found that at −20 °C a block heater improves overall fuel economy by as much as 10% — about 0.18 L on a 20 km winter commute. On a single short trip at −25 °C the saving can reach 25%. In most provinces that is worth more than the electricity it costs.
Should you plug in tonight?
Enter your city — we check tonight's forecast and give you a straight answer based on the temperature thresholds that matter.
More Subaru models
Similar vehicles