EngineBlockHeaters.caFind yours

Nissan Rogue Block Heater Guide

2008–2026

"Nissan Rogue block heater cord" is one of the most-searched fitment queries in Canada — replacement cords are a known wear item. Our diagnostic guide covers testing and swapping a damaged cord.

Factory availability

Dealer-installed accessory in Canada

Recommended heater

Frost Plug (Cartridge) Block Heater

Typical wattage: 400 W

Cord location

Cord typically routed through the lower grille.

Nissan Rogueengines & block heater part numbers

Engine list built from Natural Resources Canada model-year data; part numbers cross-referenced against the Zerostart / Phillips & Temro and Kat's application guides. Always confirm displacement and model year before ordering.

EngineYearsZerostart kitCordKat's heaterInstall location
2.5L 4-cyl2008202311412+ cord 28500
1.5L 3-cyl20222026No aftermarket listing — use the genuine Nissan dealer kit

Zerostart part numbers: 31/35-prefix = heater kit, 36-prefix = detachable cordset. Kat's: 11xxx = heater element, 28xxx = cordset, 24xxx = pad heater. Install location codes are from the manufacturer's guide (LF = left front of block, RR = right rear, etc.); "position" is the element's clock orientation during install.

First: check whether you already have one

In Canada, block heaters are frequently installed at the port, the dealer, or by a previous owner — and then forgotten. Look for a two- or three-prong plug on a black cord near the grille, bumper, or tow hooks, sometimes still zip-tied from the factory. If you find one, test it before winter with our 5-minute multimeter test.

If you need one installed

A frost plug (cartridge) block heater for the Nissan Rogue typically runs $40–$120 CAD for the part, plus shop installation. See installation costs in your city — and book in October, before the first cold snap fills every shop calendar in the Prairies.

FAQ

Does the Nissan Rogue come with a block heater?

Dealer-installed accessory in Canada. Check behind the grille for a coiled cord before buying anything — many Canadian-market vehicles have a heater installed that the owner never knew about.

What block heater fits a Nissan Rogue?

The recommended setup is a frost plug (cartridge) block heater (typically 400 W). "Nissan Rogue block heater cord" is one of the most-searched fitment queries in Canada — replacement cords are a known wear item. Our diagnostic guide covers testing and swapping a damaged cord.

What is the block heater part number for a Nissan Rogue?

2.5L 4-cyl: Kat's heater 11412 with cord 28500. Confirm displacement and model year against the fitment table before ordering.

Where is the block heater cord on a Nissan Rogue?

Cord typically routed through the lower grille.

More Nissan models

Similar vehicles