Nissan Xterra Block Heater Guide
2000–2015
Engine-specific fitment for the Nissan Xterra is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
Factory availability
Dealer-installed accessory in Canada on most years and trims
Cord location
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
Nissan Xterraengines & block heater part numbers
Engine list built from Natural Resources Canada model-year data; part numbers cross-referenced against the Zerostart / Phillips & Temro and Kat's application guides. Always confirm displacement and model year before ordering.
| Engine | Years | Zerostart kit | Cord | Kat's heater | Install location |
|---|---|---|---|---|---|
| 2.4L 4-cyl | 2000–2000 | — | — | 11401+ cord 28400 | — |
| 3.3L 6-cyl | 2000–2004 | — | — | 11417+ cord 28400 | — |
| 4L 6-cyl | 2006–2015 | — | — | 11412+ cord 28500 | — |
Zerostart part numbers: 31/35-prefix = heater kit, 36-prefix = detachable cordset. Kat's: 11xxx = heater element, 28xxx = cordset, 24xxx = pad heater. Install location codes are from the manufacturer's guide (LF = left front of block, RR = right rear, etc.); "position" is the element's clock orientation during install.
First: check whether you already have one
In Canada, block heaters are frequently installed at the port, the dealer, or by a previous owner — and then forgotten. Look for a two- or three-prong plug on a black cord near the grille, bumper, or tow hooks, sometimes still zip-tied from the factory. If you find one, test it before winter with our 5-minute multimeter test.
If you need one installed
A frost plug (cartridge) block heater for the Nissan Xterra typically runs $40–$120 CAD for the part, plus shop installation. See installation costs in your city — and book in October, before the first cold snap fills every shop calendar in the Prairies.
FAQ
Does the Nissan Xterra come with a block heater?
Dealer-installed accessory in Canada on most years and trims. Check behind the grille for a coiled cord before buying anything — many Canadian-market vehicles have a heater installed that the owner never knew about.
What block heater fits a Nissan Xterra?
The recommended setup is a frost plug (cartridge) block heater (typically 400 W). Engine-specific fitment for the Nissan Xterra is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
What is the block heater part number for a Nissan Xterra?
2.4L 4-cyl: Kat's heater 11401 with cord 28400; 3.3L 6-cyl: Kat's heater 11417 with cord 28400; 4L 6-cyl: Kat's heater 11412 with cord 28500. Confirm displacement and model year against the fitment table before ordering.
Where is the block heater cord on a Nissan Xterra?
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
More Nissan models
Similar vehicles