Honda CR-V Block Heater Guide
1997–2026
Find the part for your engine
Check the engine size on your vehicle documents or under-hood label. Choose it explicitly even when only one option appears.
Already have a factory heater? A missing power cord may be all you need. Match the connector before ordering.
View the full engine and installation tableThe reviewed CR-V applications are 1997–2001 2.0L and 2002–2014 2.4L. Their threaded heater and cord must not be carried over to a modern 2.0L hybrid just because displacement matches.
What the manufacturer sources establish
Sources checked . Only engine rows with an individual application review have reviewed fitment; other rows remain unconfirmed.
PTI lists heater 3100006 and cord 3600005 for those two older CR-V applications. The 2.4L listing ends in 2014, so 2015–2016 is separated as unresolved.
PTI 2024 guide — Honda, printed page 23 ↗Honda’s 2011 CR-V instructions identify accessory kit 08T44-SWA-1A0 and a threaded installation. That document is an example for 2011, not an approval for every CR-V.
Honda 2011 CR-V block-heater installation instructions (PDF) ↗Honda distinguishes the current 1.5L turbo from the 2.0L hybrid powertrain. This review has not established their heater kits or replacement cords.
Honda Canada — CR-V powertrains ↗
Factory availability
Confirm equipment using the VIN, original build record or accessory invoice. Model name and Canadian registration do not establish that a heater is installed.
Heater type and fitment limits
28 mm threaded heater for the reviewed older applications; later engines unresolved
Typical wattage: Read the installed heater label; wattage varies by kit
Cord location
Routing depends on the installed kit. Follow its installation instructions or have the installer identify the cord; a grille-side cable alone does not identify the heater.
Honda CR-V engines & block heater part numbers
Engine list built from Natural Resources Canada model-year data. Part numbers are catalog candidates unless a source review is shown for that application. Confirm the exact engine code, model year and installation port before ordering; an Amazon listing match does not confirm vehicle fitment.
| Engine | Years | Zerostart kit | Cord | Kat's heater | Install location |
|---|---|---|---|---|---|
| 2L 4-cyl Manufacturer-listed application CR-V 2.0L is explicitly listed for 1997–2001 only. Confirm installed engine and 28 mm threaded port; this association does not apply to the modern 2.0L hybrid. | 1997–2001 | 3100006(28 MM THD bore) | 3600005lit: 3600117 | 11419Catalog candidate — confirm exact engine code and model year.400 W+ cord 28500 | RF |
| 2L 4-cyl hybrid Modern Canadian 2.0L hybrid. The 1997–2001 heater association does not establish hybrid fitment; request a VIN-specific kit and cord. Manufacturer source | 2023–2026 | No aftermarket listing — use the genuine Honda dealer kit | |||
| 2.4L 4-cyl Manufacturer-listed application Manufacturer explicitly lists CR-V 2.4L for 2002–2014. Threaded 28 mm application, rear-right catalog location. Do not extend this review to 2015–2016. | 2002–2014 | 3100006(28 MM THD bore) | 3600005lit: 3600117 | 11419Catalog candidate — confirm exact engine code and model year.400 W+ cord 28500 | RR |
| 2.4L 4-cyl The reviewed CR-V 2.4L listing ends in 2014. This review does not establish a heater or cord for 2015–2016. Manufacturer source | 2015–2016 | No aftermarket listing — use the genuine Honda dealer kit | |||
| 1.5L 4-cyl | 2017–2026 | — | — | 11419Catalog candidate — confirm exact engine code and model year.400 W+ cord 28500 | — |
Reading the numbers: Zerostart 31/35- is the heater kit, 36- the detachable cordset ("lit" glows when the outlet is live). Kat's 11xxx is an element, 28xxx a cordset, 24xxx a pad. Location codes are the manufacturer's (LF = left front of block).
Find the heater or replacement cord
Match the exact part, engine and connector before buying. Search links are discovery links, not confirmed fits.
Amazon buying options
Zerostart 3100006
Catalog starting point: confirm exact engine code, year and installation with the manufacturer.
Choose your Amazon store
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Amazon buying options
Zerostart 3600005
Legacy fitment associations are not independently verified vehicle-specific purchase recommendations.
Cord / harness only — no heating element.
Choose your Amazon store
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Amazon buying options
Kat's 11419 threaded engine block heater
Catalog starting point: confirm exact engine code, year and installation with the manufacturer.
Choose your Amazon store
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Calculate the cost of your installed heater
Use the wattage printed on your heater and your electricity rate. A 400 W example uses 0.8 kWh over two hours; this is not a verified wattage or fuel-saving estimate for every CR-V.
Open the block heater cost calculator →Canadian buyer checklist
Three checks before spending money
1. Check for a cord
Routing depends on the installed kit. Follow its installation instructions or have the installer identify the cord; a grille-side cable alone does not identify the heater.
2. Match the engine
Confirm displacement, fuel and model year against the table. OEM accessory numbers can vary by VIN and market.
3. Check recalls
Search the VIN in the Transport Canada database before using an unfamiliar factory heater or cord.
No exact-fit listing? Use the three-question heater selector for a safe fallback.
Where to look for the Honda CR-V block heater cord
Routing depends on the installed kit. Follow its installation instructions or have the installer identify the cord; a grille-side cable alone does not identify the heater. Use a flashlight from above and through the lower grille, then check behind the bumper cover without pulling on an unidentified wire. A factory cord may be capped and clipped or zip-tied out of sight.
Found damage? Use the cord identifier before choosing between a plug-end repair and a complete cordset.
Surface heaters: check mounting compatibility
A surface heater needs a compatible mounting material, enough clearance and a location approved by its manufacturer. These products are alternatives to investigate, not confirmed applications for every engine on this page.
Amazon buying options
Zerostart 3400017 magnetic heater, 200 W
A magnetic surface heater from Zerostart. Grips any flat steel surface — oil pan, transmission pan, small-engine sump. CSA certified.
Match the surface material, size and manufacturer limits. This is not vehicle-specific fitment.
Choose your Amazon store
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Part reference
Digital multimeter with resistance and continuity
The definitive block-heater test tool. Any meter with an ohms range and audible continuity can isolate a dead cord from a failed element.
Confirm the exact specification and application in the listing before ordering.
No exact purchase listing verified yet. These links search Amazon; confirm the part before buying.
Affiliate links. As an Amazon Associate, we earn from qualifying purchases.
First: check whether you already have one
Check the build record or accessory invoice and identify any installed heater before buying parts. If a cord is present, test it — a dead element and a dead cord look identical from the outside.
If you need one installed
Ask for a quote that identifies the exact kit, included cord and labour for your engine. See our installation guide for questions to ask before booking.
FAQ
Does the Honda CR-V come with a block heater?
Confirm equipment using the VIN, original build record or accessory invoice. Model name and Canadian registration do not establish that a heater is installed.
What block heater fits a Honda CR-V?
The reviewed CR-V applications are 1997–2001 2.0L and 2002–2014 2.4L. Their threaded heater and cord must not be carried over to a modern 2.0L hybrid just because displacement matches.
What is the block heater part number for a Honda CR-V?
1997–2001 2L 4-cyl: Zerostart 3100006 with cord 3600005; 2002–2014 2.4L 4-cyl: Zerostart 3100006 with cord 3600005 Other table entries are unconfirmed catalog candidates. Check the linked application source and exact engine code before ordering.
Where is the block heater cord on a Honda CR-V?
Routing depends on the installed kit. Follow its installation instructions or have the installer identify the cord; a grille-side cable alone does not identify the heater.
How much does it cost to plug in a Honda CR-V?
Use the wattage on the installed heater label: watts ÷ 1,000 × hours plugged in × your electricity rate per kWh. For example, a 400 W heater running for two hours uses 0.8 kWh. This example is not a confirmed wattage for your vehicle.
Should you plug in tonight?
Enter your city — we check tonight's forecast and give you a straight answer based on the temperature thresholds that matter.
More Honda models
Similar vehicles