Jeep Liberty Block Heater Guide
2001–2012
Engine-specific fitment for the Jeep Liberty is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
Factory availability
Dealer-installed accessory in Canada on most years and trims
Cord location
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
Jeep Libertyengines & block heater part numbers
Engine list built from Natural Resources Canada model-year data; part numbers cross-referenced against the Zerostart / Phillips & Temro and Kat's application guides. Always confirm displacement and model year before ordering.
| Engine | Years | Zerostart kit | Cord | Kat's heater | Install location |
|---|---|---|---|---|---|
| 3.7L 6-cyl | 2001–2012 | 3100104(35 MM bore) | 3600006 | — | 2ND RR |
| 2.4L 4-cyl | 2003–2005 | 3100024(35 MM bore) | 3600006 | 11414+ cord 28400 | RR(/2ND RR 3 o'clock position) |
| 2.8L 4-cyl diesel | 2005–2006 | No aftermarket listing — use the genuine Jeep dealer kit | |||
Zerostart part numbers: 31/35-prefix = heater kit, 36-prefix = detachable cordset. Kat's: 11xxx = heater element, 28xxx = cordset, 24xxx = pad heater. Install location codes are from the manufacturer's guide (LF = left front of block, RR = right rear, etc.); "position" is the element's clock orientation during install.
First: check whether you already have one
In Canada, block heaters are frequently installed at the port, the dealer, or by a previous owner — and then forgotten. Look for a two- or three-prong plug on a black cord near the grille, bumper, or tow hooks, sometimes still zip-tied from the factory. If you find one, test it before winter with our 5-minute multimeter test.
If you need one installed
A frost plug (cartridge) block heater for the Jeep Liberty typically runs $40–$120 CAD for the part, plus shop installation. See installation costs in your city — and book in October, before the first cold snap fills every shop calendar in the Prairies.
FAQ
Does the Jeep Liberty come with a block heater?
Dealer-installed accessory in Canada on most years and trims. Check behind the grille for a coiled cord before buying anything — many Canadian-market vehicles have a heater installed that the owner never knew about.
What block heater fits a Jeep Liberty?
The recommended setup is a frost plug (cartridge) block heater (typically 400 W). Engine-specific fitment for the Jeep Liberty is listed below — aftermarket elements are available for most engines, with Zerostart and Kat's part numbers shown where the application guides list a direct fit.
What is the block heater part number for a Jeep Liberty?
3.7L 6-cyl: Zerostart kit 3100104 with cord 3600006; 2.4L 4-cyl: Zerostart kit 3100024 with cord 3600006 (Kat's 11414). Confirm displacement and model year against the fitment table before ordering.
Where is the block heater cord on a Jeep Liberty?
Most installs route the cord to the front grille or bumper area, driver's side. Check for an existing coiled cord before buying anything.
More Jeep models
Similar vehicles